Basically -what I wanted was a room to store wine (boxes and racks) that is a reasonable temp (as in stable), I am aiming for 18 degrees on the temp front (trying to balance running costs etc)
Room
House is new to us and the previous owners used this room as general storage + dodgy cellar. Room is about 2x3m but also has the underside of the stairs in there, all brick/concrete with no external windows. So, seems perfect for a conversion – temp is a major concern though as during summer it was sitting at around 25 degrees (which is pretty well what the rest of the house was)
So, step 1 was removing the skirting and cornices
![Image](http://www.members.iinet.net.au/~gbader/cellar/skirting.jpg)
![Image](http://www.members.iinet.net.au/~gbader/cellar/skirting2.jpg)
Insulation
I used "blue board", only went for 25mm (thicker would have been better but I could not really afford the space)
![Image](http://www.members.iinet.net.au/~gbader/cellar/insulation1.jpg)
![Image](http://www.members.iinet.net.au/~gbader/cellar/insulation3.jpg)
![Image](http://www.members.iinet.net.au/~gbader/cellar/insulation2.jpg)
Was pretty easier to work with (cut/glue/flush) and is about $25 a sheet (I used 19 sheets - and ended up one short for the back of the door
![Smile :)](./images/smilies/icon_smile.gif)
In the process of paining it, going with a "stone" look (I broke the "let the mrs always choose colours" rule, now stuck with something I don't really like - pics when I finish)
Cooling
Most stressful part - I reckon I have read everything on the web on this subject and toggled between cheap AC's through to "proper" cellar conditioners (big $). I even looked at the new Daikin model (Ururu Sarara ) that does Humidity control, expensive for a split (3k installed) but is 7 star (I spoke to a few people, most seem to agree that this sort of operation will void the warranty so spending $ on an expensive split is a waster, get a cheap one and replace it every 5 years or so)
In the end I got in touch with a small local AC company, they knew what I wanted and are installing a "modified" split this week (modified in the sense that it feeds water to a tray under the fan that is supposed to help maintain humidity). Very easy to deal with, seems to know his stuff and has done a few around Perth evidently
Will see I guess, the indoor fan will probably run continuously (for Humidity) but I am hoping the compressor is not on too often - I will look to install a timer (if the inbuilt one does not do it) so that the unit can only run in daylight (upgrading solar, will lose FIT anyway so need to consume as much as I can in the daytime)
Racks
Wanted bang for buck in terms of space utilisation, so going with these - http://www.wine-cellar-racks.com.au/connoisseur%20wine%20cellar%20racks.htm
They arrive this week as well, so some fun assembling and installing those
I did ask about "plasti dipping" the racks (for a softer feel) but they don't do that yet (so powder coated black) with 100mm "standoffs" to allow for insulation
So, that is progress so far
cheers
greg